I am trying to capture video using Pinnacle Studio 10 with XPSP2.

I just upgraded from Studio version 9 and Windows 2000. Studio 9 worked
pretty well with Win 2k but when my pc was reimaged with XPSP2, Studio
version 9 stopped working so we purchased the new Studio v10. Now I am faced
with a new set of problems are.

The device will not capture video. So I went to Pinnacle Tech Support. he
suggested I opent he manual capture tool and if that doesn't work then there
is a problem in the MS side of things. They said I should go to MS and see
KB885222. The KB articles says to download an update for XP. So I did. The
article then says to go to the Reg Editor and modify. I follow the directions
explicitly and this is the path I should use:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\1394_hc_hw_id\1394_instance_id\Device
Parameters. Well I get as far as PCI and then there is no 1394_.... It's just
simply not there and I don't know what to make of it.

I opened the device manager and I see the 1394 IEEE Host Controller (Texas
Instruments OHCI Compliant) and I also see the Image Device (Canon DV
Camcorder). I do not know how to get the correct key in the registry so that
I can edit it. Any ideas or suggestions would be greatly appreciated. Thank
you.

Have you checked this article:
http://support.microsoft.com/default...b;en-us;904412

Does it seem to apply to your problem???

If Yes, here is where you get it:

http://www.microsoft.com/downloads/d...DisplayLang=en


"Lisa" <(E-Mail Removed)> wrote in message
news:F5A6B00E-6635-43AF-9CE3-(E-Mail Removed)...
>I am trying to capture video using Pinnacle Studio 10 with XPSP2.
>
> I just upgraded from Studio version 9 and Windows 2000. Studio 9 worked
> pretty well with Win 2k but when my pc was reimaged with XPSP2, Studio
> version 9 stopped working so we purchased the new Studio v10. Now I am
> faced
> with a new set of problems are.
>
> The device will not capture video. So I went to Pinnacle Tech Support. he
> suggested I opent he manual capture tool and if that doesn't work then
> there
> is a problem in the MS side of things. They said I should go to MS and see
> KB885222. The KB articles says to download an update for XP. So I did. The
> article then says to go to the Reg Editor and modify. I follow the
> directions
> explicitly and this is the path I should use:
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\1394_hc_hw_id\1394_instance_id\Device
> Parameters. Well I get as far as PCI and then there is no 1394_.... It's
> just
> simply not there and I don't know what to make of it.
>
> I opened the device manager and I see the 1394 IEEE Host Controller (Texas
> Instruments OHCI Compliant) and I also see the Image Device (Canon DV
> Camcorder). I do not know how to get the correct key in the registry so
> that
> I can edit it. Any ideas or suggestions would be greatly appreciated.
> Thank
> you.

Thank you Yves, I thought it did address my problem and maybe it did but i
still have the issue. And the issue really is that I cannot capture video
with Studio 10.1 and XPSP2. No one at either Pinnacle or MS seems to know how
to rememdy the issue. I am just waiting. Any other ideas? Thanks for your
help.

"Yves Leclerc" wrote:

> Have you checked this article:
> http://support.microsoft.com/default...b;en-us;904412
>
> Does it seem to apply to your problem???
>
> If Yes, here is where you get it:
>
> http://www.microsoft.com/downloads/d...DisplayLang=en
>
>
> "Lisa" <(E-Mail Removed)> wrote in message
> news:F5A6B00E-6635-43AF-9CE3-(E-Mail Removed)...
> >I am trying to capture video using Pinnacle Studio 10 with XPSP2.
> >
> > I just upgraded from Studio version 9 and Windows 2000. Studio 9 worked
> > pretty well with Win 2k but when my pc was reimaged with XPSP2, Studio
> > version 9 stopped working so we purchased the new Studio v10. Now I am
> > faced
> > with a new set of problems are.
> >
> > The device will not capture video. So I went to Pinnacle Tech Support. he
> > suggested I opent he manual capture tool and if that doesn't work then
> > there
> > is a problem in the MS side of things. They said I should go to MS and see
> > KB885222. The KB articles says to download an update for XP. So I did. The
> > article then says to go to the Reg Editor and modify. I follow the
> > directions
> > explicitly and this is the path I should use:
> > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI\1394_hc_hw_id\1394_instance_id\Device
> > Parameters. Well I get as far as PCI and then there is no 1394_.... It's
> > just
> > simply not there and I don't know what to make of it.
> >
> > I opened the device manager and I see the 1394 IEEE Host Controller (Texas
> > Instruments OHCI Compliant) and I also see the Image Device (Canon DV
> > Camcorder). I do not know how to get the correct key in the registry so
> > that
> > I can edit it. Any ideas or suggestions would be greatly appreciated.
> > Thank
> > you.
>
>
>