Hello Everybody,
I have WinXP SP2. After running a new anti-spyware, all limited accounts are
giving errors on start-up, all of them refer to same memory address i.e.
0xc0000022. The application which try to start and end up giving
aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and others I
cannot remember. I have googled it extensively. I have found that it is
because some "3rd party" software has changed the default permissions but
there is no information available how to fix this problem. Any help in this
regard will highly be appreciated.

Thank you,
--
Syed Zeeshan Haider


--------------------------------------------------------------------------------
Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html

"Syed Zeeshan Haider" wrote
> Hello Everybody,
> I have WinXP SP2. After running a new anti-spyware, all limited accounts
> are giving errors on start-up, all of them refer to same memory address
> i.e. 0xc0000022. The application which try to start and end up giving
> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and others
> I cannot remember. I have googled it extensively. I have found that it is
> because some "3rd party" software has changed the default permissions but
> there is no information available how to fix this problem. Any help in
> this regard will highly be appreciated.

You need to check the time / time zone on the computer. You're posting from
the future.

--
Rock [MS-MVP User/Shell]

"Syed Zeeshan Haider" wrote
>I have checked my computer. As far as time goes, it is fine. However, I am
>still getting 0xc0000022 errors.

> "Rock" <(E-Mail Removed)> wrote
>> "Syed Zeeshan Haider" wrote
>>> Hello Everybody,
>>> I have WinXP SP2. After running a new anti-spyware, all limited accounts
>>> are giving errors on start-up, all of them refer to same memory address
>>> i.e. 0xc0000022. The application which try to start and end up giving
>>> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and
>>> others I cannot remember. I have googled it extensively. I have found
>>> that it is because some "3rd party" software has changed the default
>>> permissions but there is no information available how to fix this
>>> problem. Any help in this regard will highly be appreciated.
>>
>> You need to check the time / time zone on the computer. You're posting
>> from the future.

You did post from the future. Check the time zone or the time. This post
is from the future too.

Can you do a system restore to before you ran this unnamed app?

--
Rock [MS-MVP User/Shell]

I have checked my computer. As far as time goes, it is fine. However, I am
still getting 0xc0000022 errors.
--
Syed Zeeshan Haider


--------------------------------------------------------------------------------
Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html

"Rock" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> "Syed Zeeshan Haider" wrote
>> Hello Everybody,
>> I have WinXP SP2. After running a new anti-spyware, all limited accounts
>> are giving errors on start-up, all of them refer to same memory address
>> i.e. 0xc0000022. The application which try to start and end up giving
>> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and others
>> I cannot remember. I have googled it extensively. I have found that it is
>> because some "3rd party" software has changed the default permissions but
>> there is no information available how to fix this problem. Any help in
>> this regard will highly be appreciated.
>
> You need to check the time / time zone on the computer. You're posting
> from the future.
>
> --
> Rock [MS-MVP User/Shell]

"Syed Zeeshan Haider" wrote:

> Hello Everybody,
> I have WinXP SP2. After running a new anti-spyware, all limited accounts are
> giving errors on start-up, all of them refer to same memory address i.e.
> 0xc0000022. The application which try to start and end up giving
> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and others I
> cannot remember. I have googled it extensively. I have found that it is
> because some "3rd party" software has changed the default permissions but
> there is no information available how to fix this problem. Any help in this
> regard will highly be appreciated.
>
> Thank you,
> --
> Syed Zeeshan Haider
>
>
> --------------------------------------------------------------------------------
> Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html

Hi Syed,
I will check this carefully, as this can be an infection or the the
installation of the Anti-Spyware did got control on the system, like Running
Spybot inn Tea Timer mode or Ad-Aware in Ad-watch mode it will change the
Permissions and see those limited users as they shouldn't have access or be
blocked ( as it will look to them as a threat?). so try to configure the
Anti-Spyware to be shared or given permissions to other users to have access
to it, by either reinstall and configure it to be sued by all users on this
machine or locate the path which usually:
C:\Program Files\Anti-Spyware\MSA.exe => Right click it and see the security
and sharing option, also you can set it through the GPO if you have XP Pro.

This due to that the Anti-Virus Program you installed, doesn't have
sufficient Permission to those users
, so try to uninstall then install when you install the application
(Anti-Spyware) will ask you do you want this Program to run
to all user or Just "Syed" for Example, select for all user on this Computer.
Here an example
http://www.microsoft.com/communities...g=en&cr=US&p=1
The application failed to initialize properly (0xc0000022). Click on OK to
terminate the application
http://support.microsoft.com/kb/899147
Changing Default Permissions Causes STOP 0xC000021A
http://support.microsoft.com/kb/137400

NetLogon Service Fails When Secure Channel Not Functioning
http://support.microsoft.com/kb/150518

<MS::>
You may receive an error message when you try to run an application under a
user account that is not a member of the Administrators group or of the Power
Users group after you install Visual Studio 6.0 Service Pack 6
RESOLUTION
To resolve this issue, grant the Read & Execute permission to the Users
group for each affected system file. To do this, follow these steps:
1. In Microsoft Windows Explorer, locate the affected system file.
2. Right-click the file, and then click Properties.
3. Click the Security tab, and then click the Users group under Group or
user names.
4. Under Permissions for Users, click to select the Allow check box for the
Read & Execute permission.
5. Click Apply, and then click OK.
</MS::>
Or users account may be damaged or corrupted (if one can access the machine
without problem then the other user Profile is corrupted), so try to create
another account and try that.
HOW TO: Identify a Damaged User Profile and Create a New Profile in Windows
2003
http://support.microsoft.com/kb/816593/

How to copy data from a corrupted user profile to a new profile
http://support.microsoft.com/kb/811151
HTH.
nass
-----
www.nasstec.co.uk

I have tried System Restore, which did not make any difference. In fact,
System Restore said "no changes have been made to your computer".
--
Syed Zeeshan Haider


--------------------------------------------------------------------------------
Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html


"Rock" <(E-Mail Removed)> wrote in message
news:%(E-Mail Removed)...
> "Syed Zeeshan Haider" wrote
>>I have checked my computer. As far as time goes, it is fine. However, I am
>>still getting 0xc0000022 errors.
>
>> "Rock" <(E-Mail Removed)> wrote
>>> "Syed Zeeshan Haider" wrote
>>>> Hello Everybody,
>>>> I have WinXP SP2. After running a new anti-spyware, all limited
>>>> accounts are giving errors on start-up, all of them refer to same
>>>> memory address i.e. 0xc0000022. The application which try to start and
>>>> end up giving aforementioned error are ccApp.exe, reader_sl.exe,
>>>> osCheck.exe and others I cannot remember. I have googled it
>>>> extensively. I have found that it is because some "3rd party" software
>>>> has changed the default permissions but there is no information
>>>> available how to fix this problem. Any help in this regard will highly
>>>> be appreciated.
>>>
>>> You need to check the time / time zone on the computer. You're posting
>>> from the future.
>
> You did post from the future. Check the time zone or the time. This post
> is from the future too.
>
> Can you do a system restore to before you ran this unnamed app?
>
> --
> Rock [MS-MVP User/Shell]

Tried everything here nothing worked. Those BUILTIN commands resulted in a
message saying "access denied".
--
Syed Zeeshan Haider


--------------------------------------------------------------------------------
Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html

"nass" <(E-Mail Removed)> wrote in message
news:12776241-8E5E-439B-A281-(E-Mail Removed)...
>
>
> "Syed Zeeshan Haider" wrote:
>
>> Hello Everybody,
>> I have WinXP SP2. After running a new anti-spyware, all limited accounts
>> are
>> giving errors on start-up, all of them refer to same memory address i.e.
>> 0xc0000022. The application which try to start and end up giving
>> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and others
>> I
>> cannot remember. I have googled it extensively. I have found that it is
>> because some "3rd party" software has changed the default permissions but
>> there is no information available how to fix this problem. Any help in
>> this
>> regard will highly be appreciated.
>>
>> Thank you,
>> --
>> Syed Zeeshan Haider
>>
>>
>> --------------------------------------------------------------------------------
>> Learn about famous muslim names at
>> http://szh.20m.com/learn/aboutnames.html
>
> Hi Syed,
> I will check this carefully, as this can be an infection or the the
> installation of the Anti-Spyware did got control on the system, like
> Running
> Spybot inn Tea Timer mode or Ad-Aware in Ad-watch mode it will change the
> Permissions and see those limited users as they shouldn't have access or
> be
> blocked ( as it will look to them as a threat?). so try to configure the
> Anti-Spyware to be shared or given permissions to other users to have
> access
> to it, by either reinstall and configure it to be sued by all users on
> this
> machine or locate the path which usually:
> C:\Program Files\Anti-Spyware\MSA.exe => Right click it and see the
> security
> and sharing option, also you can set it through the GPO if you have XP
> Pro.
>
> This due to that the Anti-Virus Program you installed, doesn't have
> sufficient Permission to those users
> , so try to uninstall then install when you install the application
> (Anti-Spyware) will ask you do you want this Program to run
> to all user or Just "Syed" for Example, select for all user on this
> Computer.
> Here an example.
> http://www.microsoft.com/communities...g=en&cr=US&p=1
> The application failed to initialize properly (0xc0000022). Click on OK to
> terminate the application
> http://support.microsoft.com/kb/899147
> Changing Default Permissions Causes STOP 0xC000021A
> http://support.microsoft.com/kb/137400
>
> NetLogon Service Fails When Secure Channel Not Functioning
> http://support.microsoft.com/kb/150518
>
> <MS::>
> You may receive an error message when you try to run an application under
> a
> user account that is not a member of the Administrators group or of the
> Power
> Users group after you install Visual Studio 6.0 Service Pack 6
> RESOLUTION
> To resolve this issue, grant the Read & Execute permission to the Users
> group for each affected system file. To do this, follow these steps:
> 1. In Microsoft Windows Explorer, locate the affected system file.
> 2. Right-click the file, and then click Properties.
> 3. Click the Security tab, and then click the Users group under Group or
> user names.
> 4. Under Permissions for Users, click to select the Allow check box for
> the
> Read & Execute permission.
> 5. Click Apply, and then click OK.
> </MS::>
> Or users account may be damaged or corrupted (if one can access the
> machine
> without problem then the other user Profile is corrupted), so try to
> create
> another account and try that.
> HOW TO: Identify a Damaged User Profile and Create a New Profile in
> Windows
> 2003
> http://support.microsoft.com/kb/816593/
>
> How to copy data from a corrupted user profile to a new profile
> http://support.microsoft.com/kb/811151
> HTH.
> nass
> -----
> www.nasstec.co.uk

Hi Syed,
Does this happen with an Admin Account?.
How to Identify a Damaged User Profile and Create a New Profile
http://support.microsoft.com/kb/305506

How to copy data from a corrupted user profile to a new profile:
http://support.microsoft.com/kb/811151

Try to uninstall the application and see if that will make these user able
to access their accounts without trouble, my guess your computer infected
with a virus, try to scan from another online scanner to get clean bill of
health.
HTH.
nass
-------
www.nasstec.co.uk

"Syed Zeeshan Haider" wrote:

> Tried everything here nothing worked. Those BUILTIN commands resulted in a
> message saying "access denied".
> --
> Syed Zeeshan Haider
>
>
> --------------------------------------------------------------------------------
> Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html
>
> "nass" <(E-Mail Removed)> wrote in message
> news:12776241-8E5E-439B-A281-(E-Mail Removed)...
> >
> >
> > "Syed Zeeshan Haider" wrote:
> >
> >> Hello Everybody,
> >> I have WinXP SP2. After running a new anti-spyware, all limited accounts
> >> are
> >> giving errors on start-up, all of them refer to same memory address i.e.
> >> 0xc0000022. The application which try to start and end up giving
> >> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and others
> >> I
> >> cannot remember. I have googled it extensively. I have found that it is
> >> because some "3rd party" software has changed the default permissions but
> >> there is no information available how to fix this problem. Any help in
> >> this
> >> regard will highly be appreciated.
> >>
> >> Thank you,
> >> --
> >> Syed Zeeshan Haider
> >>
> >>
> >> --------------------------------------------------------------------------------
> >> Learn about famous muslim names at
> >> http://szh.20m.com/learn/aboutnames.html
> >
> > Hi Syed,
> > I will check this carefully, as this can be an infection or the the
> > installation of the Anti-Spyware did got control on the system, like
> > Running
> > Spybot inn Tea Timer mode or Ad-Aware in Ad-watch mode it will change the
> > Permissions and see those limited users as they shouldn't have access or
> > be
> > blocked ( as it will look to them as a threat?). so try to configure the
> > Anti-Spyware to be shared or given permissions to other users to have
> > access
> > to it, by either reinstall and configure it to be sued by all users on
> > this
> > machine or locate the path which usually:
> > C:\Program Files\Anti-Spyware\MSA.exe => Right click it and see the
> > security
> > and sharing option, also you can set it through the GPO if you have XP
> > Pro.
> >
> > This due to that the Anti-Virus Program you installed, doesn't have
> > sufficient Permission to those users
> > , so try to uninstall then install when you install the application
> > (Anti-Spyware) will ask you do you want this Program to run
> > to all user or Just "Syed" for Example, select for all user on this
> > Computer.
> > Here an example.
> > http://www.microsoft.com/communities...g=en&cr=US&p=1
> > The application failed to initialize properly (0xc0000022). Click on OK to
> > terminate the application
> > http://support.microsoft.com/kb/899147
> > Changing Default Permissions Causes STOP 0xC000021A
> > http://support.microsoft.com/kb/137400
> >
> > NetLogon Service Fails When Secure Channel Not Functioning
> > http://support.microsoft.com/kb/150518
> >
> > <MS::>
> > You may receive an error message when you try to run an application under
> > a
> > user account that is not a member of the Administrators group or of the
> > Power
> > Users group after you install Visual Studio 6.0 Service Pack 6
> > RESOLUTION
> > To resolve this issue, grant the Read & Execute permission to the Users
> > group for each affected system file. To do this, follow these steps:
> > 1. In Microsoft Windows Explorer, locate the affected system file.
> > 2. Right-click the file, and then click Properties.
> > 3. Click the Security tab, and then click the Users group under Group or
> > user names.
> > 4. Under Permissions for Users, click to select the Allow check box for
> > the
> > Read & Execute permission.
> > 5. Click Apply, and then click OK.
> > </MS::>
> > Or users account may be damaged or corrupted (if one can access the
> > machine
> > without problem then the other user Profile is corrupted), so try to
> > create
> > another account and try that.
> > HOW TO: Identify a Damaged User Profile and Create a New Profile in
> > Windows
> > 2003
> > http://support.microsoft.com/kb/816593/
> >
> > How to copy data from a corrupted user profile to a new profile
> > http://support.microsoft.com/kb/811151
> > HTH.
> > nass
> > -----
> > www.nasstec.co.uk
>
>
>

Thank you very much for your continued support. It is highly appreciated.

After sending my last post, I continued to try to use BUILTIN command as
instructed on the pages that you gave links to. When I tried multiple times,
I was successful at last. The only error that remains gives the same memory
address is occurring when WinXP tries to load NkbMonitor.exe. I guess it
controlled by some other dll file. So far I have repaired permission for
msvcp71.dll and msvcr71.dll. The later file took multiple attemptemts and
restarts to be successfully repaired.

Thank you again and please let me know if you have any information regarding
the error caused by NkbMonitor.exe.

And yes, this error (and all previously mentioned errors) only happen(s)
with Limited accounts only. Admin account works just fine. I have already
removed all kinds of anti-spyware including the suspected one.

Best regards,
--
Syed Zeeshan Haider


--------------------------------------------------------------------------------
Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html


"nass" <(E-Mail Removed)> wrote in message
news:EA7DD421-1456-45AF-9E85-(E-Mail Removed)...
>
> Hi Syed,
> Does this happen with an Admin Account?.
> How to Identify a Damaged User Profile and Create a New Profile
> http://support.microsoft.com/kb/305506
>
> How to copy data from a corrupted user profile to a new profile:
> http://support.microsoft.com/kb/811151
>
> Try to uninstall the application and see if that will make these user able
> to access their accounts without trouble, my guess your computer infected
> with a virus, try to scan from another online scanner to get clean bill of
> health.
> HTH.
> nass
> -------
> www.nasstec.co.uk
>
> "Syed Zeeshan Haider" wrote:
>
>> Tried everything here nothing worked. Those BUILTIN commands resulted in
>> a
>> message saying "access denied".
>> --
>> Syed Zeeshan Haider
>>
>>
>> --------------------------------------------------------------------------------
>> Learn about famous muslim names at
>> http://szh.20m.com/learn/aboutnames.html
>>
>> "nass" <(E-Mail Removed)> wrote in message
>> news:12776241-8E5E-439B-A281-(E-Mail Removed)...
>> >
>> >
>> > "Syed Zeeshan Haider" wrote:
>> >
>> >> Hello Everybody,
>> >> I have WinXP SP2. After running a new anti-spyware, all limited
>> >> accounts
>> >> are
>> >> giving errors on start-up, all of them refer to same memory address
>> >> i.e.
>> >> 0xc0000022. The application which try to start and end up giving
>> >> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and
>> >> others
>> >> I
>> >> cannot remember. I have googled it extensively. I have found that it
>> >> is
>> >> because some "3rd party" software has changed the default permissions
>> >> but
>> >> there is no information available how to fix this problem. Any help in
>> >> this
>> >> regard will highly be appreciated.
>> >>
>> >> Thank you,
>> >> --
>> >> Syed Zeeshan Haider
>> >>
>> >>
>> >> --------------------------------------------------------------------------------
>> >> Learn about famous muslim names at
>> >> http://szh.20m.com/learn/aboutnames.html
>> >
>> > Hi Syed,
>> > I will check this carefully, as this can be an infection or the the
>> > installation of the Anti-Spyware did got control on the system, like
>> > Running
>> > Spybot inn Tea Timer mode or Ad-Aware in Ad-watch mode it will change
>> > the
>> > Permissions and see those limited users as they shouldn't have access
>> > or
>> > be
>> > blocked ( as it will look to them as a threat?). so try to configure
>> > the
>> > Anti-Spyware to be shared or given permissions to other users to have
>> > access
>> > to it, by either reinstall and configure it to be sued by all users on
>> > this
>> > machine or locate the path which usually:
>> > C:\Program Files\Anti-Spyware\MSA.exe => Right click it and see the
>> > security
>> > and sharing option, also you can set it through the GPO if you have XP
>> > Pro.
>> >
>> > This due to that the Anti-Virus Program you installed, doesn't have
>> > sufficient Permission to those users
>> > , so try to uninstall then install when you install the application
>> > (Anti-Spyware) will ask you do you want this Program to run
>> > to all user or Just "Syed" for Example, select for all user on this
>> > Computer.
>> > Here an example.
>> > http://www.microsoft.com/communities...g=en&cr=US&p=1
>> > The application failed to initialize properly (0xc0000022). Click on OK
>> > to
>> > terminate the application
>> > http://support.microsoft.com/kb/899147
>> > Changing Default Permissions Causes STOP 0xC000021A
>> > http://support.microsoft.com/kb/137400
>> >
>> > NetLogon Service Fails When Secure Channel Not Functioning
>> > http://support.microsoft.com/kb/150518
>> >
>> > <MS::>
>> > You may receive an error message when you try to run an application
>> > under
>> > a
>> > user account that is not a member of the Administrators group or of the
>> > Power
>> > Users group after you install Visual Studio 6.0 Service Pack 6
>> > RESOLUTION
>> > To resolve this issue, grant the Read & Execute permission to the Users
>> > group for each affected system file. To do this, follow these steps:
>> > 1. In Microsoft Windows Explorer, locate the affected system file.
>> > 2. Right-click the file, and then click Properties.
>> > 3. Click the Security tab, and then click the Users group under Group
>> > or
>> > user names.
>> > 4. Under Permissions for Users, click to select the Allow check box for
>> > the
>> > Read & Execute permission.
>> > 5. Click Apply, and then click OK.
>> > </MS::>
>> > Or users account may be damaged or corrupted (if one can access the
>> > machine
>> > without problem then the other user Profile is corrupted), so try to
>> > create
>> > another account and try that.
>> > HOW TO: Identify a Damaged User Profile and Create a New Profile in
>> > Windows
>> > 2003
>> > http://support.microsoft.com/kb/816593/
>> >
>> > How to copy data from a corrupted user profile to a new profile
>> > http://support.microsoft.com/kb/811151
>> > HTH.
>> > nass
>> > -----
>> > www.nasstec.co.uk
>>
>>
>>

Hi Syed,
Glad to hear there is some progress!.
About NkbMonitor.exe : Is PictureProject Module and located in this path:
c:\windows\system32\NkbMonitor.exe
and also here:
C:\Program Files\Nikon\PictureProject\NkbMonitor.exe
On the Registry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User
Shell Folders =NkbMonitor.exe
If you have this Digital Camera Software try to uninstall it and Reinstall
the latest Driver for this camera, the driver may be corrupted or damaged by
heavy usage of the operating system.
HTH.
nass
------
www.nasstec.co.uk

"Syed Zeeshan Haider" wrote:

> Thank you very much for your continued support. It is highly appreciated.
>
> After sending my last post, I continued to try to use BUILTIN command as
> instructed on the pages that you gave links to. When I tried multiple times,
> I was successful at last. The only error that remains gives the same memory
> address is occurring when WinXP tries to load NkbMonitor.exe. I guess it
> controlled by some other dll file. So far I have repaired permission for
> msvcp71.dll and msvcr71.dll. The later file took multiple attemptemts and
> restarts to be successfully repaired.
>
> Thank you again and please let me know if you have any information regarding
> the error caused by NkbMonitor.exe.
>
> And yes, this error (and all previously mentioned errors) only happen(s)
> with Limited accounts only. Admin account works just fine. I have already
> removed all kinds of anti-spyware including the suspected one.
>
> Best regards,
> --
> Syed Zeeshan Haider
>
>
> --------------------------------------------------------------------------------
> Learn about famous muslim names at http://szh.20m.com/learn/aboutnames.html
>
>
> "nass" <(E-Mail Removed)> wrote in message
> news:EA7DD421-1456-45AF-9E85-(E-Mail Removed)...
> >
> > Hi Syed,
> > Does this happen with an Admin Account?.
> > How to Identify a Damaged User Profile and Create a New Profile
> > http://support.microsoft.com/kb/305506
> >
> > How to copy data from a corrupted user profile to a new profile:
> > http://support.microsoft.com/kb/811151
> >
> > Try to uninstall the application and see if that will make these user able
> > to access their accounts without trouble, my guess your computer infected
> > with a virus, try to scan from another online scanner to get clean bill of
> > health.
> > HTH.
> > nass
> > -------
> > www.nasstec.co.uk
> >
> > "Syed Zeeshan Haider" wrote:
> >
> >> Tried everything here nothing worked. Those BUILTIN commands resulted in
> >> a
> >> message saying "access denied".
> >> --
> >> Syed Zeeshan Haider
> >>
> >>
> >> --------------------------------------------------------------------------------
> >> Learn about famous muslim names at
> >> http://szh.20m.com/learn/aboutnames.html
> >>
> >> "nass" <(E-Mail Removed)> wrote in message
> >> news:12776241-8E5E-439B-A281-(E-Mail Removed)...
> >> >
> >> >
> >> > "Syed Zeeshan Haider" wrote:
> >> >
> >> >> Hello Everybody,
> >> >> I have WinXP SP2. After running a new anti-spyware, all limited
> >> >> accounts
> >> >> are
> >> >> giving errors on start-up, all of them refer to same memory address
> >> >> i.e.
> >> >> 0xc0000022. The application which try to start and end up giving
> >> >> aforementioned error are ccApp.exe, reader_sl.exe, osCheck.exe and
> >> >> others
> >> >> I
> >> >> cannot remember. I have googled it extensively. I have found that it
> >> >> is
> >> >> because some "3rd party" software has changed the default permissions
> >> >> but
> >> >> there is no information available how to fix this problem. Any help in
> >> >> this
> >> >> regard will highly be appreciated.
> >> >>
> >> >> Thank you,
> >> >> --
> >> >> Syed Zeeshan Haider
> >> >>
> >> >>
> >> >> --------------------------------------------------------------------------------
> >> >> Learn about famous muslim names at
> >> >> http://szh.20m.com/learn/aboutnames.html
> >> >
> >> > Hi Syed,
> >> > I will check this carefully, as this can be an infection or the the
> >> > installation of the Anti-Spyware did got control on the system, like
> >> > Running
> >> > Spybot inn Tea Timer mode or Ad-Aware in Ad-watch mode it will change
> >> > the
> >> > Permissions and see those limited users as they shouldn't have access
> >> > or
> >> > be
> >> > blocked ( as it will look to them as a threat?). so try to configure
> >> > the
> >> > Anti-Spyware to be shared or given permissions to other users to have
> >> > access
> >> > to it, by either reinstall and configure it to be sued by all users on
> >> > this
> >> > machine or locate the path which usually:
> >> > C:\Program Files\Anti-Spyware\MSA.exe => Right click it and see the
> >> > security
> >> > and sharing option, also you can set it through the GPO if you have XP
> >> > Pro.
> >> >
> >> > This due to that the Anti-Virus Program you installed, doesn't have
> >> > sufficient Permission to those users
> >> > , so try to uninstall then install when you install the application
> >> > (Anti-Spyware) will ask you do you want this Program to run
> >> > to all user or Just "Syed" for Example, select for all user on this
> >> > Computer.
> >> > Here an example.
> >> > http://www.microsoft.com/communities...g=en&cr=US&p=1
> >> > The application failed to initialize properly (0xc0000022). Click on OK
> >> > to
> >> > terminate the application
> >> > http://support.microsoft.com/kb/899147
> >> > Changing Default Permissions Causes STOP 0xC000021A
> >> > http://support.microsoft.com/kb/137400
> >> >
> >> > NetLogon Service Fails When Secure Channel Not Functioning
> >> > http://support.microsoft.com/kb/150518
> >> >
> >> > <MS::>
> >> > You may receive an error message when you try to run an application
> >> > under
> >> > a
> >> > user account that is not a member of the Administrators group or of the
> >> > Power
> >> > Users group after you install Visual Studio 6.0 Service Pack 6
> >> > RESOLUTION
> >> > To resolve this issue, grant the Read & Execute permission to the Users
> >> > group for each affected system file. To do this, follow these steps:
> >> > 1. In Microsoft Windows Explorer, locate the affected system file.
> >> > 2. Right-click the file, and then click Properties.
> >> > 3. Click the Security tab, and then click the Users group under Group
> >> > or
> >> > user names.
> >> > 4. Under Permissions for Users, click to select the Allow check box for
> >> > the
> >> > Read & Execute permission.
> >> > 5. Click Apply, and then click OK.
> >> > </MS::>
> >> > Or users account may be damaged or corrupted (if one can access the
> >> > machine
> >> > without problem then the other user Profile is corrupted), so try to
> >> > create
> >> > another account and try that.
> >> > HOW TO: Identify a Damaged User Profile and Create a New Profile in
> >> > Windows
> >> > 2003
> >> > http://support.microsoft.com/kb/816593/
> >> >
> >> > How to copy data from a corrupted user profile to a new profile
> >> > http://support.microsoft.com/kb/811151
> >> > HTH.
> >> > nass
> >> > -----
> >> > www.nasstec.co.uk
> >>
> >>
> >>
>
>
>