Hi,

I know this has been asked many times - but I still havn't found a solution
that works!

I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the MSDN
subscriber area.

I checked the SHA1 value and the downloaded file matches the one listed.

However - I get the following error message:

"Windows cannot copy files required for the installation. The files may be
corrupt or missing. Make sure
all files required for installation are available, and restart the
installation. Error code: 0x80070017".

I have made 2 burns of the DVD - neither worked

This is a clean install - not an upgrade.

The same system installed and ran Beta2 just fine (I have formatted this
system to install RTM)

Any ideas on what to try next?

Regards

Hi,

Try reducing your burn speed to 1x or 2x. This is a common problem.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org

"MSDN" <(E-Mail Removed)> wrote in message
news:uLn%23%(E-Mail Removed)...
>
> Hi,
>
> I know this has been asked many times - but I still havn't found a
> solution that works!
>
> I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the
> MSDN subscriber area.
>
> I checked the SHA1 value and the downloaded file matches the one listed.
>
> However - I get the following error message:
>
> "Windows cannot copy files required for the installation. The files may be
> corrupt or missing. Make sure
> all files required for installation are available, and restart the
> installation. Error code: 0x80070017".
>
> I have made 2 burns of the DVD - neither worked
>
> This is a clean install - not an upgrade.
>
> The same system installed and ran Beta2 just fine (I have formatted this
> system to install RTM)
>
> Any ideas on what to try next?
>
> Regards
>
>

Hi,

I burned the 2nd copy at 2x... I will try 1x - but if that works - it's a
bit of a poor show!!!

I did a couple more attempts last night - it always seems to fall over at
91/92% of expanding files (if that's any help?)

Regards



"Rick Rogers" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hi,
>
> Try reducing your burn speed to 1x or 2x. This is a common problem.
>
> --
> Best of Luck,
>
> Rick Rogers, aka "Nutcase" - Microsoft MVP
> http://mvp.support.microsoft.com/
> Windows help - www.rickrogers.org
>
> "MSDN" <(E-Mail Removed)> wrote in message
> news:uLn%23%(E-Mail Removed)...
>>
>> Hi,
>>
>> I know this has been asked many times - but I still havn't found a
>> solution that works!
>>
>> I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the
>> MSDN subscriber area.
>>
>> I checked the SHA1 value and the downloaded file matches the one listed.
>>
>> However - I get the following error message:
>>
>> "Windows cannot copy files required for the installation. The files may
>> be corrupt or missing. Make sure
>> all files required for installation are available, and restart the
>> installation. Error code: 0x80070017".
>>
>> I have made 2 burns of the DVD - neither worked
>>
>> This is a clean install - not an upgrade.
>>
>> The same system installed and ran Beta2 just fine (I have formatted this
>> system to install RTM)
>>
>> Any ideas on what to try next?
>>
>> Regards
>>
>>
>

Hi,

No other real suggestions. The error message is quite clear about what it's
missing. The files on the disk are likely corrupt and cannot be read. If it
were a problem with the drive or antivirus detection in the system bios
interfering, it would stall much earlier.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org

"MSDN" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> Hi,
>
> I burned the 2nd copy at 2x... I will try 1x - but if that works - it's a
> bit of a poor show!!!
>
> I did a couple more attempts last night - it always seems to fall over at
> 91/92% of expanding files (if that's any help?)
>
> Regards
>
>
>
> "Rick Rogers" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Hi,
>>
>> Try reducing your burn speed to 1x or 2x. This is a common problem.
>>
>> --
>> Best of Luck,
>>
>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>> http://mvp.support.microsoft.com/
>> Windows help - www.rickrogers.org
>>
>> "MSDN" <(E-Mail Removed)> wrote in message
>> news:uLn%23%(E-Mail Removed)...
>>>
>>> Hi,
>>>
>>> I know this has been asked many times - but I still havn't found a
>>> solution that works!
>>>
>>> I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the
>>> MSDN subscriber area.
>>>
>>> I checked the SHA1 value and the downloaded file matches the one listed.
>>>
>>> However - I get the following error message:
>>>
>>> "Windows cannot copy files required for the installation. The files may
>>> be corrupt or missing. Make sure
>>> all files required for installation are available, and restart the
>>> installation. Error code: 0x80070017".
>>>
>>> I have made 2 burns of the DVD - neither worked
>>>
>>> This is a clean install - not an upgrade.
>>>
>>> The same system installed and ran Beta2 just fine (I have formatted this
>>> system to install RTM)
>>>
>>> Any ideas on what to try next?
>>>
>>> Regards
>>>
>>>
>>
>
>

Did you check the validity of the download. Another possibility.


"MSDN" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> Hi,
>
> I burned the 2nd copy at 2x... I will try 1x - but if that works - it's a
> bit of a poor show!!!
>
> I did a couple more attempts last night - it always seems to fall over at
> 91/92% of expanding files (if that's any help?)
>
> Regards
>
>
>
> "Rick Rogers" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Hi,
>>
>> Try reducing your burn speed to 1x or 2x. This is a common problem.
>>
>> --
>> Best of Luck,
>>
>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>> http://mvp.support.microsoft.com/
>> Windows help - www.rickrogers.org
>>
>> "MSDN" <(E-Mail Removed)> wrote in message
>> news:uLn%23%(E-Mail Removed)...
>>>
>>> Hi,
>>>
>>> I know this has been asked many times - but I still havn't found a
>>> solution that works!
>>>
>>> I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the
>>> MSDN subscriber area.
>>>
>>> I checked the SHA1 value and the downloaded file matches the one listed.
>>>
>>> However - I get the following error message:
>>>
>>> "Windows cannot copy files required for the installation. The files may
>>> be corrupt or missing. Make sure
>>> all files required for installation are available, and restart the
>>> installation. Error code: 0x80070017".
>>>
>>> I have made 2 burns of the DVD - neither worked
>>>
>>> This is a clean install - not an upgrade.
>>>
>>> The same system installed and ran Beta2 just fine (I have formatted this
>>> system to install RTM)
>>>
>>> Any ideas on what to try next?
>>>
>>> Regards
>>>
>>>
>>
>
>

"MSDN" <(E-Mail Removed)> wrote in message
news:uLn%23%(E-Mail Removed)...
>
> Hi,
>
> I know this has been asked many times - but I still havn't found a
> solution that works!
>
> I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the
> MSDN subscriber area.
>
> I checked the SHA1 value and the downloaded file matches the one listed.
>
> However - I get the following error message:
>
> "Windows cannot copy files required for the installation. The files may be
> corrupt or missing. Make sure
> all files required for installation are available, and restart the
> installation. Error code: 0x80070017".
>
> I have made 2 burns of the DVD - neither worked
>
> This is a clean install - not an upgrade.
>
> The same system installed and ran Beta2 just fine (I have formatted this
> system to install RTM)
>
> Any ideas on what to try next?
>
> Regards
>
>

Do not know if will help with RTM, but experienced exactly same problem
trying to instal RC2 (RC1 & other Betas were OK) from within XP. The CRC/MD5
Hash were Ok as was the DVD. Yet an instal, by booting from the DVD, worked
first time without any error messages. Slower, but it did instal.

HTH

Geoff

Hi,

thanks for all the replies ! - Keep them coming

The download is from MSDN Subscribers area - so is valid - they provide a
SHA1 key to validate the download - this matches perfectly with the SHA1
generated on my system.

The install is a clean install - booting from the dvd - not through XP and
is to a clean HDD.

Regards


"John Barnes" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Did you check the validity of the download. Another possibility.
>
>
> "MSDN" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>>
>> Hi,
>>
>> I burned the 2nd copy at 2x... I will try 1x - but if that works - it's a
>> bit of a poor show!!!
>>
>> I did a couple more attempts last night - it always seems to fall over at
>> 91/92% of expanding files (if that's any help?)
>>
>> Regards
>>
>>
>>
>> "Rick Rogers" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>> Hi,
>>>
>>> Try reducing your burn speed to 1x or 2x. This is a common problem.
>>>
>>> --
>>> Best of Luck,
>>>
>>> Rick Rogers, aka "Nutcase" - Microsoft MVP
>>> http://mvp.support.microsoft.com/
>>> Windows help - www.rickrogers.org
>>>
>>> "MSDN" <(E-Mail Removed)> wrote in message
>>> news:uLn%23%(E-Mail Removed)...
>>>>
>>>> Hi,
>>>>
>>>> I know this has been asked many times - but I still havn't found a
>>>> solution that works!
>>>>
>>>> I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the
>>>> MSDN subscriber area.
>>>>
>>>> I checked the SHA1 value and the downloaded file matches the one
>>>> listed.
>>>>
>>>> However - I get the following error message:
>>>>
>>>> "Windows cannot copy files required for the installation. The files may
>>>> be corrupt or missing. Make sure
>>>> all files required for installation are available, and restart the
>>>> installation. Error code: 0x80070017".
>>>>
>>>> I have made 2 burns of the DVD - neither worked
>>>>
>>>> This is a clean install - not an upgrade.
>>>>
>>>> The same system installed and ran Beta2 just fine (I have formatted
>>>> this system to install RTM)
>>>>
>>>> Any ideas on what to try next?
>>>>
>>>> Regards
>>>>
>>>>
>>>
>>
>>
>

Hi,

I had exactly the same problem after installing Vista x64 over Vista x86.

All I did was repeat the x64 install and select the format partition and
didn't get the problem again (all this with the same burnt media DVD).

Brian

Hi,

Thanks for the suggestions...

I burnt the image to a DVD-RW instead of a DVD-R and it worked first time
!!!

How annoying?

Regards

Phil


"MSDN" <(E-Mail Removed)> wrote in message
news:uLn%23%(E-Mail Removed)...
>
> Hi,
>
> I know this has been asked many times - but I still havn't found a
> solution that works!
>
> I downloaded Vista (en_windows_vista_x86_dvd_X12-34293.iso ) from the
> MSDN subscriber area.
>
> I checked the SHA1 value and the downloaded file matches the one listed.
>
> However - I get the following error message:
>
> "Windows cannot copy files required for the installation. The files may be
> corrupt or missing. Make sure
> all files required for installation are available, and restart the
> installation. Error code: 0x80070017".
>
> I have made 2 burns of the DVD - neither worked
>
> This is a clean install - not an upgrade.
>
> The same system installed and ran Beta2 just fine (I have formatted this
> system to install RTM)
>
> Any ideas on what to try next?
>
> Regards
>
>