Could someone please tell me what this value needs to be.

Hi Darren,

If you boot the client PC using the RBFG floppy does the image deploy
successfully?
The error is referring to an entry in your DHCP scope options. The help
files in Windows 2000 explain this in greater detail. I have seen this
problem in other issues and it was due to the BootP traffic not being passed
by your switch/router. Most routers have a setting to enable this feature.
You can look at your DHCP Scope options within a Microsoft Management
Console and under the scope options for your DHCP server you can add the 067
value and specify the bootfile name. Please read the help files on
Supporting BootP clients. BootP is an established TCP/IP standard for host
configuration that precedes DHCP. If you haven't already tested with the
RBFG disk please do so. This will show that the client is capable obtaining
a DHCP address from the server. When th

Good luck,

--
Matt Hendrix, [MSFT]

"This posting is provided "AS IS" with no warranties, and confers no
rights."


"darrenf" <(E-Mail Removed)> wrote in message
news:0a0401c39dff$115b18f0$(E-Mail Removed)...
> Could someone please tell me what this value needs to be.