I have an old proliant 800 4300 (6/200), 512 Mb ram, pentium pro 200, hdd
4,5 Mb... the controller is SYMBIOS 56C875J ..i think.
The hdd ID is 0.

In this pc WINDOWS NT Server 4.0 work fine...
It install Symbios C810 driver controller.

I want to install windows 2000 but i have a serius problem.

When a partition screen appears there is this text:

0 MB Disk 0 at Id 0 on bus 0 on symc8xx
Setup cannot access this disk.

When i press enter another blue screen (error) appairs:
*** STOP: 0x0000001E (0x00000005, 0xBFFC0BC, 0x00000000, 0x639CB608)
KMODE_EXCEPITION_NOT_HANDLED

*** Address BFFC08BC base at BFFA2000, DateStamp 38441c2a Setupdd.sys


Then....i have downloaded a controller driver from Hp site... the only
controller driver is for ultra wide scsi 2... but i think that my controller
is only ultra wide scsi...
This driver, loaded with F6 option in windows 2000, don't is a solution..

I have downloaded a driver from Symbios site, fors SYMBIOS 53C875J .... not
is a solution..same error.
Driver for 53C810 ...same error..

It's impossible install windows 2000 in this pc ????

Help me please..

Alberto

I would have thought 4.5gb I assume & not 4.5mb was bordering on the maybe
size wise

"Alberto" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>I have an old proliant 800 4300 (6/200), 512 Mb ram, pentium pro 200, hdd
>4,5 Mb... the controller is SYMBIOS 56C875J ..i think.
> The hdd ID is 0.
>
> In this pc WINDOWS NT Server 4.0 work fine...
> It install Symbios C810 driver controller.
>
> I want to install windows 2000 but i have a serius problem.
>
> When a partition screen appears there is this text:
>
> 0 MB Disk 0 at Id 0 on bus 0 on symc8xx
> Setup cannot access this disk.
>
> When i press enter another blue screen (error) appairs:
> *** STOP: 0x0000001E (0x00000005, 0xBFFC0BC, 0x00000000, 0x639CB608)
> KMODE_EXCEPITION_NOT_HANDLED
>
> *** Address BFFC08BC base at BFFA2000, DateStamp 38441c2a Setupdd.sys
>
>
> Then....i have downloaded a controller driver from Hp site... the only
> controller driver is for ultra wide scsi 2... but i think that my
> controller is only ultra wide scsi...
> This driver, loaded with F6 option in windows 2000, don't is a solution..
>
> I have downloaded a driver from Symbios site, fors SYMBIOS 53C875J ....
> not is a solution..same error.
> Driver for 53C810 ...same error..
>
> It's impossible install windows 2000 in this pc ????
>
> Help me please..
>
> Alberto
>

"DL" <address@invalid> ha scritto nel messaggio
news:(E-Mail Removed)...
>I would have thought 4.5gb I assume & not 4.5mb was bordering on the maybe
>size wise

Oh yes...4,5 Gb ... :-))

I suspect it would be a driver issue, you are using the F6 option to install
the driver early in the setup process?

"Alberto" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> "DL" <address@invalid> ha scritto nel messaggio
> news:(E-Mail Removed)...
>>I would have thought 4.5gb I assume & not 4.5mb was bordering on the maybe
>>size wise
>
> Oh yes...4,5 Gb ... :-))
>
>

Oh, yes...i have tested many driver...but same results..
Windows 2000 if i use F6 option, load always the same driver: symc8xx ...and
crash!
WinNT 4.0 Server, instead, use C810 driver...and it work fine!
Very strange, because windows 2000 is NT based...

In the list of compatibility hardware of windows 2000 my proliant 800 6/200
4300 don't appear... it's incompatible?
There is Proliant 800 6/180 ... that is 180 MHz ...and my is 200 MHz..

"DL" <address@invalid> ha scritto nel messaggio
news:%(E-Mail Removed)...
>I suspect it would be a driver issue, you are using the F6 option to
>install the driver early in the setup process?
>
> "Alberto" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> "DL" <address@invalid> ha scritto nel messaggio
>> news:(E-Mail Removed)...
>>>I would have thought 4.5gb I assume & not 4.5mb was bordering on the
>>>maybe size wise
>>
>> Oh yes...4,5 Gb ... :-))
>>
>>
>
>
>

"Alberto" <(E-Mail Removed)> ha scritto nel messaggio
news:(E-Mail Removed)...
>I have an old proliant 800 4300 (6/200), 512 Mb ram, pentium pro 200, hdd
>4,5 Mb... the controller is SYMBIOS 56C875J ..i think.
> The hdd ID is 0.
.........................

A solution:

The problem is a SYMC8XX driver that charged by Windows 2000. It’s bad..or
wrong.
This is a solution:
Create a diskette setup of windows 2000 (4 diskette) from windows 2000 pro
cd rom.
In the diskette n.3 there is two files:
SYMC8XX.SY_ and SYMC810.SY_

Copy SYMC810.SY_ in your desktop (or other folder in your computer), rename
this file to SYMC8XX.SY_, copy this file to the disk n.3 and ovewrite.

Copy windows 2000 pro cd-rom in a folder of your computer, example win2kpro
(all files and all folders).
Into i386 folder there are two files: SYMC8XX.SY_ and SYMC810.SY_

Copy SYMC810.SY_ in your desktop (or other folder in your computer), rename
this file to SYMC8XX.SY_, copy this file to i386 folder and ovewrite.

Burning all files in a new cd-rom.

Then...
Insert a floppy n.1...2...3..4...and your disk work fine!

I don't know if you must modify a service pack after installation when you
upgrade your windows.. (but i think yes..)

Bye